How do I replace the Recharge Cell?Updated a month ago

Note: Always disconnect the power before servicing your purifier.

1. Turn the top cover counterclockwise and remove it.

2. Carefully slide out the old Recharge Cell and discard it.

3. Remove the red cap from the bottom of the new Recharge Cell.

4. Slide the new cell into the purifier, aligning the side channels.

5. Align the new top cover with the Puraclenz logo facing the operational lights (approximately 30° counterclockwise).

6. Twist the top cover clockwise until you hear an audible click from the safety latch. The unit will automatically resume operation.